T8-AML-V3S Firmware 5.1.1 T8 V3s software update

T8-AML-V3s FIRMWARE DOWNLOAD

 

If your T8-AML-V3s has any issues with software you can restore it with these files, you should only use this if your TV box is unresponsive. If your box turns on then you should use the OTA update app located in all apps.  T8-AML-V3s FIRMWARE

 

The Ebox OTA update app is so ease to use.

  1. OPEN OTA Updater
  2. If their is an update available click download Update.
  3. You will then see two tick boxes wipe cache and clear data tick both boxes then click next.
  4. The app will close down when its finished downloading.
  5. Open the app again and follow the same steps again this time it will reboot and update your device ( you will not have to wait for the download again)

image

WARNING THIS IS FOR THE T8-AML-V3S ONLY

LOOK ON THE BACK OF YOUR DEVICE IF YOU DO NOT HAVE THE T8-AML-V3S PRINTED ON THE BACK YOU WILL DAMAGE YOUR DEVICE.

 

Click here to download the latest software update for your T8-AML-V3s TV Box

 

Latest T8-AML-V3s Firmware Download  How to Upgrade.

  1. Click the link above and download the T8V3s recovory file.
  2. unpack the 5 files onto a SD card.
  3. Do not unpack the T8V3s.zip file
  4. Put the 5 files onto a SD card and put into the side of the T8
  5. Turn off the power with the power button on the front of the T8 make sure it is off.
  6. On the right hand side of the device is the reset button.
  7. Using a tooth pick  hold this button in. You know you have pressed it if you feel the click.
  8. Now press the power button on the front of the device while holding in the button.
  9. While holding the reset button down, wait until you see the logo and you can then release the reset button.
  10. The recovery menu should now be shown and the device should update.
  11. Your device will go to a black screen after the boot video this is normal and your device will boot up after a few minutes.

DISCLAIMER

The EntertainmentBox Firmware Downloads utilities listed here can cause permanent damage to your product if applied incorrectly. Before downloading any firmware updates, verify the firmware you are downloading is appropriate for the specific model number of your product. If you have any doubts, contact Customer Service for guidance.We will not and can not be held responsible for incorrect use.

Download Latest T8AMLV3s Firmware Upgrade

24 Comments

  1. keith.w.stewart

    My T8 AML3s is connected wirelessly to my router in another room. When I test the speed on my iPad sat next to the T8 I get 50+ meg however when I use one of the speed testers in the Apps to test the speed to the T8 it shows less than 1 meg. And when I test the network in Systems info it shows “busy” rather than connected. can’t move the router any closer.
    Is there anything I can do to improve wifi? Would setting up the T8 own hot spot help? Under settings “more” or shoul I just buy Powerline adaptor?

    Thanks
    Keith

    • Entertainment Box

      Hi, although you have compared the iPad to the T8V3s with WIFI range they have different network/module components so they are different altogether. A Powerline adapter would help increase the WIFI range so try that and remember that you normally have up to 14 meters range (excluding walls, e.t.c).

      Thank you.

  2. [email protected]

    That’s great cheers will give it a go!

  3. [email protected]

    Hi,

    Just reading advice on OTA updater but my box sticker says T8-AML-V3, not V3S. Bought it when just released but don’t want to unnecessarily ruin it by using the OTA update app! Do I need to anything at all? Never updated the OTA app but box working well generally!

    Cheers!

    • Entertainment Box

      Hi, the OTA updater will download updates specifically for the device which you are using. If there are any available updates in the OTA feel free to use them so you can get the latest software from Entertainmentbox and keep your device optimised. I hope that was helpful,

      Thank you.

  4. [email protected]

    I have just used OTA updater on my T8 v3s purchased from yourselves when finished it had removed all my add ons. went back to blue start up background,had to download all my add ons again, is this normal or is there a way to use the ota updater without losing all your add ons. I did the update as described in your help video. Thanks Ian

    • Liam

      Hi Ian, the OTA updater is a firmware update for your system & wipes all your current data before installing the new firmware & pre-installed apps. When running the OTA you get the options to choose wipe cache &/or data as mentioned in the guide above at step 3, but i’d recommend selecting both as the guide states so you start with a clean update.

  5. Paul

    After downloading the OTA and selecting to wipe data & cache, it boots to recovery screen and does nothing 🙁

    • Liam

      Hi Paul, if this is your 1st time running the OTA insert an SD card in to the device 1st before running it, after you have run the update you will no longer need to insert an SD card for future updates, make sure your SD card is formatted to Fat 32 or NTFS format before you attempt the update, please note some members have had more success formating the SD card to NTFS while others have managed fine using Fat 32.

  6. iancom

    I couldn’t flash the image with a fat32 formatted SD card so I formatted it to NTFS and it worked fine, might help someone.

  7. Patty Daigle

    I got 6 boxes from you 5 are great I have one box that will only down load at 1my others are going 80 I used a sd card to put the new firmware on all 6 please help me .I got them on the march 10

    • Entertainment Box

      Hello Patty, try flashing the firmware and that should sort the issue out but if not just contact our support team if you are in warranty and we will assist you further.

      Thank you.

  8. Mark

    I’ve just updated my firmware for my v3s and only ticked the wipe cache and not the wipe data does this make any difference to the update

  9. Mark

    Hi,updated my v3s with the latest firmware but only ticked the wipe cache and not the wipe data does this any difference the update.

    • Entertainment Box

      Hello Mark, the difference is that you will still have your previous files saved on your device if you only wiped cache and Wiping data will clear everything before flashing the firmware.

      Thank you.

  10. Steve H

    Just seen that there is a Rom update available. How can I see what changes/fixes are included. Is there a changelog?

    Steve

    • Entertainment Box

      Hello Steve, you will see the changes/fixes in the Changelog while downloading your firmware.

      Thank you.

  11. Brian Carter

    Hi, Just updated my T8-AML-V3S to March 6th firmware & can no longer access Settings from the Home screen, I have to open Apps & access Settings from there. How can I get the Settings Icon to work again from the Home Screen?
    Thanks

  12. [email protected]

    Do need to fill out warrenty

    • Entertainment Box

      Hello, you automatically receive a 1 year warranty upon purchase of our devices so there is no need to fill out any warranty forms.

      Thank you.

Leave a Reply

Same day shipping30 day returns policyinternational-shipping51 year warranty on all products checkout@Droidsticks

Product Categories

Best Android Powered TV Boxes, Kodi TV BoxesCable accessoryGamePadsKodi Installation ServicesMini Projectors Powered By Android Official TV box Remotes Other AccessoryPro remotes KeyboardsRepairs CentreReplacement plugs for Android Based TV boxes Smart Gadgets and TechnologySmart TV Box Accessories, Android TV box AccessoriesVirtual Reality