Latest M8N Firmware Download

M8N Firmware


Latest M8N Firmware


Latest M8N Firmware Download, this will work on – ENY EM8 The Square one not the round one.

If you have a M8N TV box you can flash your device with our firmware. (fully rooted)

Check the sticker on the bottom of your M8 if your  model is a M8N then this is the correct Firmware for you.

If you have a M8N TV box you can flash your device with our latest M8N firmware. ( fully rooted)

For an easy way to put your device into recovery mode download THIS APP and install it, this will allow you to  reboot your device into recovery mode.

Click here to download the latest software update for your M8N TV Box

Latest M8N Firmware  date of build 18/05/2016

Latest M8N Firmware Download  How to Upgrade.

  1. Click the link above and download the file.
  2. unpack the 5 files onto a SD card.
  3. Do not unpack the .zip file you find together with the other 4 files.
  4. Put the 5 files onto a SD card and put into the side of the M8
  5. Unplug the power from the M8N make sure it is off.
  6. At the bottom of the AV jack hole is the reset button.
  7. Using a tooth pick  hold this button in. You know you have pressed it if you feel the click.
  8. Now plug in the power cord.
  9. While holding the reset button down, wait until you see the logo and you can then release the reset button.
  10. The recovery menu should now be shown and the device should update.

Entertainment Box

Entertainment Box offer the easiest way to buy a new Kodi box or an Android powered TV box.  Entertainment Box have a UK Shop, and also a dispatch centre in Chicago. You can view our top rated 2017 EBox T8 V internet box here. Furthermore you can review Android based Kodi TV boxes on our compare TV box page. Also compare Android based projectors using our pocket projector review guide. You can see the full range of items we stock by visiting our main shop. We also have tons of help and how to guides. And also the best apps for to get you set up. Are you new to TV boxes? don’t worry follow our set up a TV box guide. And you will be up and running in no time. Are you looking for the latest Kodi download? We have you covered!  


The EntertainmentBox  Firmware Downloads utilities listed here can cause permanent damage to your product if applied incorrectly. Before downloading any firmware updates, verify the firmware you are downloading is appropriate for the specific model number of your product. If you have any doubts, contact Customer Service for guidance.We will not and can not be held responsible for incorrect use.



  1. marineking

    Hi. Is there any chance this box will ever receive android 5 in the future, either by you or other source? Or the hardware is only compatible with 4, and if I want newer androids I must get another model?

  2. gregory Pedurand

    Hi ! Good day
    Thank you for your support 🙂
    I have receive my box and this is a M8N cool
    I have see the Hardware info and this is the same exactly.
    I have a custom firmware with 3 files
    Factory update param_aml
    Normaly in my box I do update with the app Update&Backup.
    In my new box this is not exactly the same launcher and build are not change with a tablet ex: nexus 10 the remote control not work correctly no kill memory etc.. But are stable.
    My firmware are more good for me.
    I can update with the same method with the app Update&Backup ? Or I do to flash it with the scewdriver ?
    I don’t know if I do install before Twrp recovery for make a nandroid of my firmware installed ?
    Because I don’t want this custom recovery “twrp” when I open SuperSU for the first time ask if normal or twrp ?
    Thank you

    • Entertainment Box

      Hello, you will be able to flash your M8N via the ‘pin method’ which will put it into automatic flash or in recovery mode where you can select the zip from EXT.

      Thank you.

  3. gregory Pedurand

    hi ! I have a box tv with the stickers M8N but is it an ampac technologie amlogic S802 A9r4 2Ghz quad core & Octa core mali 450Mp 650Mhz.
    What the difference with the M8 ? I want to buy another box and I have a french custom firmware in my M8N with recovery it work if I want install in this box :

  4. Cesar


    Everything works fine with the firmware, except that the Wifi and Ethernet connections turn off after about 15 minutes. I made sure that my box is an OTT M8N, is there a fix for this? Is there an updated firmware for this?

    Thank you!

  5. pj

    I have an m8n tried to update it is telling me it is for n200c this is a k200? always used your firmware no problem

    • Entertainment Box

      Hello PJ, we are not aware of any issues with our M8N firmware but you could contact support with your box issue if you are still in warranty.

      Thank you.

  6. david

    when i try to use the update gives a prompt saying “this package is a “n200c” device; this is a mach 8″
    what do i do

    • Entertainment Box

      Hello David, your device is not compatible with this firmware so I wouldn’t recommend using it.

      Thank you.

  7. Shaun Alexander

    I’m looking for a new firmware for my M8-P can’t see any with the M8-P firmware update can anybody point me in the right place please

    • Entertainment Box

      Hello, sorry but we currently only have these firmwares available. Good luck in finding your firmware,

      Thank you.

  8. Steven

    I download the files for M8N and when i open the zip via winzip the file is empty, any ideas please?

    • Entertainment Box

      Hello Steven, I have just download the M8N folder and had no issues in opening the folder and was using the basic windows functions. Try downloading it again and then open the downloaded zip then transfer the files to your SD card. Hope that helped

      Thank you.

  9. Paul Stevens

    Hi What is the latest firmware for my OTT TV BOX M8 and have you got a link I could use please

    • Entertainment Box

      Hello Mr Stevens, Click HERE for a link to our latest firmware for the U-M8 device.
      Thank you.

  10. Andy

    I have the exact same situation as Eric D. I placed all the files onto an SD card, pressing Reset, I powered on and nothing. No Blue light for power. The box powered up no problem before doing this. With the power lead in, I put an external drive into one of the USB slots and it powered up. This process of flashing the firmware has sabotaged My power supply to the mains. I have tried various other power leads and nothing..

    • Entertainment Box

      Hello Andy, sorry to hear about your issues. If you have any previous firmware for your M8N then use that and it may bring the power and display back. If you are still in warranty you can contact support.


    • Entertainment Box

      Hello Patrick, the standard remote control should and will work on all modes but third party/universal remotes would need to have their usb receivers inserted before attempting entering recovery mode in order for them to be recognised.


  11. Derek Christian

    Just a Quick Question.
    If I do a Firmware Download. Will this over write all my Add-ons and build.
    If so, How can I save them.

    • Entertainment Box

      Hello, the firmware upgrade will delete all current files before installing the latest firmware. You can easily re-download these add ons again, CLICK HERE for help with add ons and Kodi.

      Thank you.

  12. wayne

    does not work,recovery menu comes on screen and does nothing cant use remote to chose anything at recovery screen???pulling my hair out….

    • Entertainment Box

      Hello Wayne, sorry to hear your frustration. If you have purchased your M8 from us and are still within your 1 year warranty then contact our support team for further assistance.


  13. Someone

    When I try to open the files from my downloads it reads “can’t open file”

    Can anyone tell me why and how I can fix it?

    • Entertainment Box

      Hello, your are probably trying to open the zip file on your M8 and if so that is wrong. You need to transfer the zip files to the SD card then flash your device. The full instructions for this are on the firmware download pages.

      Thank you.

  14. Eric D

    I hope I didn’t mess my M8N box up. I have loaded the download files, unzipped and installed the five files to the root of the SD drive that has nothing else on it. Depressed the rest (felt the click) and plugged power in. Nothing seem to happen now. no light on the front and nothing displayed to the HDMI to tv. Now what? Thanks.

    • Entertainment Box

      Hello Eric, no power to your device is now a hard ware issue. You may need a replacement power supply or the device itself could have the hardware issue. If you are a customer of ours that are in warranty, contact our support team for further assistance.


    • Entertainment Box

      Hello, the M8s is different from the M8N so I wouldnt dare you to do that operation incase it bricks your device or loses WIFI. Perphaps contact your supplier for the correct firmware to avoid any issues…


  15. Bill

    I have a bricked m8n. It has zero display. Does this work to reboot it? I have tried both files on an sad card with zero results following instructions and after repowering unit there is nothing to speak of as a result. I’m tired of holding in reset button! What am I missing?

    • Entertainment Box

      Hello, if you have formatted your SD card and have the correct files on there ONLY then you should be able to perform the manual firmware update successfully. If all else fails then it may be totally bricked.

      Good luck.

  16. EntertainmentBox

    When was the last time you updated the firmware ? if your box has no power light you need contact your supplier for a replacement.

  17. robert forsyth

    the m8n file once downloaded (has 5 files in the zip ) and more importantly it appears to be the wrong file as it shows up in the build.prop as an update for a M8S.BCM4335 .
    Therefore the M8N will not update .
    please replace with the correct file for the M8N .


  18. karl goscombe

    hi, i think this firmware might have a fault? ( ive done firmware before, so i,m confident in doing it) itried to flash my mn8 and it just showed m8 logo and nothing else even after 30mins, so tried again a few times, same thing.
    i flashed it succesfully 1st time with another companys firmware.
    this was 4 weeks ago, and it is running fine.
    i would like DS/EB on all my devices ( i also have a t8 v2 from yourselves) can you look into this please and let me know the outcome. many thanks

Be safe and smart. Unlock a TV box with IPVanishSame day shipping30 day returns policyinternational-shipping51 year warranty on all products checkout@Droidsticks

Product Categories

Best Android Powered TV Boxes, Kodi TV BoxesCable accessoryGamePadsKodi Installation ServicesMini Projectors Powered By Android Official TV box Remotes Other AccessoryPro remotes KeyboardsRepairs CentreReplacement plugs for Android Based TV boxes Smart Gadgets and TechnologySmart TV Box Accessories, Android TV box AccessoriesVirtual Reality
%d bloggers like this: