The following procedure will allow you to install our Latest 5.1.1 Firmware update with Kodi / EBMC 16.1 .Follow these simple steps. The Latest MXQ Pro 4K software we have available to download is in the form of a .zip file. This means that the file is ‘compressed’ as a single file to make it easier to download. You will need to ‘unzip’ or ‘Extract’ MXQ Pro 4K Image file from the zip file once downloaded.
1/ You will need a USB to USB cable
2/ You will need a pin or pen to press the reset button in
3/ You will need a Windows PC
4/ You will need to use the Amlogic USB Burning Tool
5/ The latest MXQ Pro Firmware
1/ Download the latest MXQ Pro Firmware
2/ Hold the reset button located inside the AV port, then connect the power and USB cable. (holding the reset button the whole time) You will need a pen or pin to push in the reset button as in the image bellow.
3/ Connect your MXQ 4K to your PC with a USB to USB also connect the power cable.
4/ You can now release the reset button as the device should now be in recovery mode
Follow the step by step guide on how to use the Amlogic USB burning tool.
This guide was brought to you by EntertainmentBox.com
EBox - The name you can trust.
You must be logged in to reply to this topic.