This topic contains 3 replies, has 3 voices, and was last updated by  bordi 1 year, 7 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #50997

    Latest M8N Firmware


    Latest M8N Firmware Download, this will work on – ENY EM8 The Square one not the round one.

    If you have a M8N TV box you can flash your device with our firmware. (fully rooted)

    Check the sticker on the bottom of your M8 if your  model is a M8N then this is the correct Firmware for you.

    If you have a M8N TV box you can flash your device with our latest M8N firmware. ( fully rooted)

    For an easy way to put your device into recovery mode download THIS APP and install it, this will allow you to  reboot your device into recovery mode.

    Click here to download the latest software update for your M8N TV Box

    Latest M8N Firmware  date of build 18/05/2016

    Latest M8N Firmware Download  How to Upgrade.

    1. Click the link above and download the M8N.zip file.
    2. unpack the 5 files onto a SD card.
    3. Do not unpack the .zip file you find together with the other 4 files.
    4. Put the 5 files onto a SD card and put into the side of the M8
    5. Unplug the power from the M8N make sure it is off.
    6. At the bottom of the AV jack hole is the reset button.
    7. Using a tooth pick  hold this button in. You know you have pressed it if you feel the click.
    8. Now plug in the power cord.
    9. While holding the reset button down, wait until you see the logo and you can then release the reset button.
    10. The recovery menu should now be shown and the device should update.


    The EntertainmentBox  Firmware Downloads utilities listed here can cause permanent damage to your product if applied incorrectly. Before downloading any firmware updates, verify the firmware you are downloading is appropriate for the specific model number of your product. If you have any doubts, contact Customer Service for guidance.We will not and can not be held responsible for incorrect use.



    Latest Firmware has been released



    hello trying to update my m8 box downloaded

    relevent files install with an sd card as instructed

    but when the logo came up it went directlt to a sub menu

    then i picked upgrade from sd card

    whwn it was installing it failed

    it said ” footer is wrong ” what does that mean ?

    signature verification failed can u help thks alot


Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.