How to update U-M8 and M8N TV Boxes

Home Forums General help, hints and tips Firmware Help How to update U-M8 and M8N TV Boxes

This topic contains 4 replies, has 5 voices, and was last updated by  bordi 4 months ago.

  • Creator
    Topic
  • #51097

    Latest U-M8 Firmware Download

    Latest U-M8 Firmware Download, this will work on – ENY EM8 The Square one not the round one.

    If you have a M8, U-M8  TV box you can flash your device with our firmware. (fully rooted)

    If you have a U-M8 TV box you can flash your device with our latest M8 firmware. (All fully rooted)

    For an easy way to put your device into recovery mode download THIS APP and install it, this will allow you to  reboot your device into recovery mode.

    Click here to download the latest software update for your U-M8

    Latest U-M8 Firmware date of build 14/10/2015

    EntertainmentBox Latest U-M8 Firmware How to Upgrade.

    Latest U-M8 Firmware Download How to Upgrade.

    1. Click the link above and download the M8.zip file.
    2. unpack the 5 files onto a SD card.
    3. Do not unpack the ds-m8-ota——-.zip file
    4. Put the 5 files onto a SD card and put into the side of the M8
    5. Unplug the power from the UM-8 make sure it is off.
    6. At the bottom of the AV jack hole is the reset button.
    7. Using a tooth pick  hold this button in. You know you have pressed it if you feel the click.
    8. Now plug in the power cord.
    9. While holding the reset button down, wait until you see the logo and you can then release the reset button.
    10. The recovery menu should now be shown and the device should update.
    11. If you see this error at the bottom of the screen when you try to update

    DISCLAIMER

    The EntertainmentBox Firmware Downloads utilities listed here can cause permanent damage to your product if applied incorrectly. Before downloading any firmware updates, verify the firmware you are downloading is appropriate for the specific model number of your product. If you have any doubts, contact Customer Service for guidance.We will not and can not be held responsible for incorrect use.

     
     
    Latest M8N Firmware

    LATEST M8N FIRMWARE DOWNLOAD

    Latest M8N Firmware Download, this will work on – ENY EM8 The Square one not the round one.

    If you have a M8N TV box you can flash your device with our firmware. (fully rooted)

    Check the sticker on the bottom of your M8 if your  model is a M8N then this is the correct Firmware for you.

    If you have a M8N TV box you can flash your device with our latest M8N firmware. ( fully rooted)

    For an easy way to put your device into recovery mode download THIS APP and install it, this will allow you to  reboot your device into recovery mode.

    Click here to download the latest software update for your M8N TV Box

    Latest M8N Firmware  date of build 29/01/2016

    Latest M8N Firmware Download  How to Upgrade.

    1. Click the link above and download the M8N.zip file.
    2. unpack the 5 files onto a SD card.
    3. Do not unpack the .zip file you find together with the other 4 files.
    4. Put the 5 files onto a SD card and put into the side of the M8
    5. Unplug the power from the M8N make sure it is off.
    6. At the bottom of the AV jack hole is the reset button.
    7. Using a tooth pick  hold this button in. You know you have pressed it if you feel the click.
    8. Now plug in the power cord.
    9. While holding the reset button down, wait until you see the logo and you can then release the reset button.
    10. The recovery menu should now be shown and the device should update.

    DISCLAIMER

    The EntertainmentBox  Firmware Downloads utilities listed here can cause permanent damage to your product if applied incorrectly. Before downloading any firmware updates, verify the firmware you are downloading is appropriate for the specific model number of your product. If you have any doubts, contact Customer Service for guidance.We will not and can not be held responsible for incorrect use.

     

    EBox - The name you can trust.

Viewing 4 replies - 1 through 4 (of 4 total)
  • Author
    Replies
  • #53266

    jan_sccon
    Participant

    Followed the guide and my box was stuck on the TVunlocked logo for an hour so tried unplugging and plugging back in again. Still stuck.

    Tried to put into recovery mode with pin on back and re-install software, but seems to have bricked the box. Powering up merely flashes the light on the front momentarily then dead.

    I’m using one of your own boxes, which is fully rooted and installing your firmware to update, now box the box is not responding !!!!!

    Any ideas??

    #53279

    Entertainment Box
    Participant

    Hello Jan, you have to be sure of using the correct firmware and methods to avoid these problems from arising but if it is still within warranty you could contact our support team.

    Thank you.

    #59700

    Andybradley
    Participant

    Hi,

    Since updating to the latest firmware, the first I’ve done in a while, I can no longer see wookie and all the usual apps? I’ve tried downloading it but I have never get to the stage of finding it in video add ons like I previously did

    #59791

    bordi
    Participant

    Try the instructions on the site link below
    “How to install the wookie wizard”

    How to install the Wookie Wizard

Viewing 4 replies - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Same day shipping30 day returns policyinternational-shipping51 year warranty on all products checkout@Droidsticks

Product Categories

Best Android Powered TV Boxes, Kodi TV BoxesCable accessoryGamePadsKodi Installation ServicesMini Projectors Powered By Android Official TV box Remotes Other AccessoryPro remotes KeyboardsRepairs CentreReplacement plugs for Android Based TV boxes Smart Gadgets and TechnologySmart TV Box Accessories, Android TV box AccessoriesVirtual Reality