How to update T8-AML-V3 TV Box

Home Forums General help, hints and tips Firmware Help How to update T8-AML-V3 TV Box

This topic contains 0 replies, has 1 voice, and was last updated by  EntertainmentBox 6 months, 3 weeks ago.

  • Creator
    Topic
  • #51094

    Download Latest T8AMLV3 Firmware Upgrade

    LATEST T8-AML-V3 FIRMWARE DOWNLOAD THIS WILL ALSO WORK ON THE T8 PLUS

    This is where you can get Latest T8-AML-V3 Firmware DownloadDownload Latest T8-AML-V3 Firmware Upgrade

    This will be the last time you will have to use a SD card when you update your firmware. We have now finished our OTA (over the air) update app, this will be installed when you run this firmware update. After you have finished flashing this latest update you will see our New Ebox-Update app, This is what you will use to update your T8 Firmware from now on, when you open the app it will inform you if their is a new Update available.

    The Ebox OTA update app is so ease to use.

    1. OPEN OTA Updater
    2. If their is an update available click download Update.
    3. You will then see two tick boxes wipe cache and clear data tick both boxes then click next.
    4. The app will close down when its finished downloading.
    5. Open the app again and follow the same steps again this time it will reboot and update your device ( you will not have to wait for the download again)

    If you have a T8-AML-V3 TV box you can flash your device with our latest T8-AML-V3 firmware. (All fully rooted)

    For an easy way to put your device into recovery mode download THIS APP and install it, this will allow you to  reboot your device into recovery mode.

    Click here to download the latest software update for your T8-AML-V3 TV Box

    T8-AML-V3 Latest Firmware date of build 01/11/2015

    Latest T8-AML-V3 Firmware Download  How to Upgrade.

    1. Click the link above and download the T8-AML-V3.zip file.
    2. unpack the 3 files onto a SD card.
    3. Do not unpack the T8V3.27012015.V3.1.3.zip file
    4. Put the 3 files onto a SD card and put into the side of the T8
    5. Turn off the power with the power button on the front of the T8 make sure it is off.
    6. On the right hand side of the device is the reset button.
    7. Using a tooth pick  hold this button in. You know you have pressed it if you feel the click.
    8. Now press the power button on the front of the device while holding in the button.
    9. While holding the reset button down, wait until you see the logo and you can then release the reset button.
    10. The recovery menu should now be shown and the device should update.

    DISCLAIMER

    The EntertainmentBox Firmware Downloads utilities listed here can cause permanent damage to your product if applied incorrectly. Before downloading any firmware updates, verify the firmware you are downloading is appropriate for the specific model number of your product. If you have any doubts, contact Customer Service for guidance.We will not and can not be held responsible for incorrect use.

    Download Latest T8AMLV3 Firmware Upgrade

    EBox - The name you can trust.

You must be logged in to reply to this topic.

Same day shipping30 day returns policyinternational-shipping51 year warranty on all products checkout@Droidsticks

Product Categories

Best Android Powered TV Boxes, Kodi TV BoxesCable accessoryGamePadsKodi Installation ServicesMini Projectors Powered By Android Official TV box Remotes Other AccessoryPro remotes KeyboardsRepairs CentreReplacement plugs for Android Based TV boxes Smart Gadgets and TechnologySmart TV Box Accessories, Android TV box AccessoriesVirtual Reality