How to update T8-AML-V2 TV Box

This topic contains 8 replies, has 7 voices, and was last updated by  Leswhinn 11 months ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
  • #51096



    This is where you can get Latest T8-AML-V2 Firmware Downloadic_launcher

    This will be the last time you will have to use a SD card when you update your firmware. We have now finished our OTA (over the air) update app, this will be installed when you run this firmware update. After you have finished flashing this latest update you will see our New Ebox-Update app, This is what you will use to update your T8 Firmware from now on, when you open the app it will inform you if their is a new Update available.


    The Ebox OTA update app is so ease to use.

    1. OPEN OTA Updater
    2. If their is an update available click download Update.
    3. You will then see two tick boxes wipe cache and clear data tick both boxes then click next.
    4. The app will close down when its finished downloading.
    5. Open the app again and follow the same steps again this time it will reboot and update your device ( you will not have to wait for the download again)

    This is where you can get Latest T8-AML-V2 Firmware Download

    If you have a T8-AML-V2 TV box you can flash your device with our latest T8-AML-V2 firmware. (All fully rooted)

    For an easy way to put your device into recovery mode download THIS APP and install it, this will allow you to  reboot your device into recovery mode.

    Click here to download the latest software update for your T8-AML-V2 TV Box

    T8-AML-V2 Latest Firmware date of build 08/02/2016

    UPDATE: We have finally managed to resolve the issue of the T8 not booting into recovery after the OTA has finished downloading the latest update. There is an easy fix all you need to do is manually update your Firmware with the link above ,(you will need an SD card) the next OTA update we release will work without any issues.

    Latest T8-AML-V2 Firmware Download  How to Upgrade.

    1. Click the link above and download the T8-V2 file.
    2. unpack the 5 files onto a SD card.
    3. Do not unpack the .ZIP file located with the other 4 files
    4. Put the 5 files onto a SD card and put into the side of the T8
    5. Turn off the power with the power button on the front of the T8 make sure it is off.
    6. On the right hand side of the device is the reset button.
    7. Using a tooth pick  hold this button in. You know you have pressed it if you feel the click.
    8. Now press the power button on the front of the device while holding in the button.
    9. While holding the reset button down, wait until you see the logo and you can then release the reset button.
    10. The recovery menu should now be shown and the device should update.


    The EntertainmentBox Firmware Downloads utilities listed here can cause permanent damage to your product if applied incorrectly. Before downloading any firmware updates, verify the firmware you are downloading is appropriate for the specific model number of your product. If you have any doubts, contact Customer Service for guidance.We will not and can not be held responsible for incorrect use.



    Good evening. I have just updated my T8V2 to overcome the OTA issue. I was wondering whether there is a way to get the EBOX MC app onto the home screen. I have had a look, but cannot see an option to change the short cuts on the home screen.

    Grateful for any pointer or links.





    i think that the home screen is preset by the f/ware mate, so i dont think its possible



    If you click on the + on your home screen you should be able to add the shortcut that way? if that is what you mean?



    The main ‘Home Screen’ is set by the firmware & can’t be altered i believe, how ever if you click on the ‘Favourites’ tab just above the large ‘Kodi’ tile you will see a list of your favourite apps.

    At the end of the ‘Faourites’ list you will see a (+) symbol, clicking on this will allow you to add & remove apps from the list.



    Can I use a USB drive instead of an SD card to do update ? Thanks in advance.



    you can do it that way darren, but we recommend using the sd card as its easier



    Hi Ladies and Gents,
    Today I updated my T8 v2 box with the latest firmware after doing a Force stop, clear cach and data on Kodi,
    I used the boot to recovery app after the download and had a SD card slotted in the T8 which I’d put all the files from
    the Firmware download,
    After this was all done and dusted I then downloaded the Wookie wizard Zip and installed it,
    After it installed I was kicked out of Kodi and I then clicked Kodi again to go back, The Wookie started but on the screen
    where Wookie starts melting/falling to bits I was kicked back again, This happened 4 times before I eventually managed to get on the wookie/kodi screen where i could pick what i wanted to watch…..
    Hope you can understand by my description of what was happening

    Anyone know why my T8 v2 is doing this please and what I can do to stop it?

    Thank you,



    Well just had a bit of a surprise lol

    While T8 v2 box was on stand by I pulled the mains plug out then back in and
    Turned on the box.. once it loaded onto main app screen I clicked on Kodi and
    No Glitches this time 🙂 went right into the main Wookie/kodi page with everything there…
    Very pleasant surprise!! 😉

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.

Be safe and smart. Unlock a TV box with IPVanishSame day shipping30 day returns policyinternational-shipping51 year warranty on all products checkout@Droidsticks

Product Categories

Best Android Powered TV Boxes, Kodi TV BoxesCable accessoryGamePadsKodi Installation ServicesMini Projectors Powered By Android Official TV box Remotes Other AccessoryPro remotes KeyboardsRepairs CentreReplacement plugs for Android Based TV boxes Smart Gadgets and TechnologySmart TV Box Accessories, Android TV box AccessoriesVirtual Reality