banner

How to Connect / Setup Hard Disk Drive T8 AML V3s TV Box

EntertainmentBox


This topic contains 0 replies, has 1 voice, and was last updated by  EntertainmentBox 1 year, 3 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #51057

    Setup Hard Disk Drive T8 AML V3s TV Box

     

    How to connect / Setup Hard Disk Drive T8 AML V3s TV Box. So now you can extend the storage capacity of your EntertainmentBox T8-AML-V3s.

    So on your T8-AML-V3-S device by simply connecting a Hard Disk Drive ( HDD ) up to 2 TB which creates more space available on the device which can be used for recording/downloading content via T8 V3s. Now check our guide for setup Internal Hard Disk Drive with your T8 AML V3s TV Box.

     

    Which hard disk drive (HDD) to buy and from where ?

    We do sell Western Digital Internal Hard disk drive ( HDD ) for device which is easy to setup on device as it comes with partition and formatted to NTFS already done on it so its just plug and use it.  We recommend the the Western Digital brand which you can buy from us which is compatible for T8-AML- V3s from here or somewhere you want it to be and if you have already got other with you as well than you are good to go with it for setup on device however you may need to create partition and format the HDD to NTFS format as per help video instruction given on page.

     

    How to attach Hard Disk Drive ( HDD ) with T8-AML-V3s device ?

    Step 1 – Take the T8 V3s device from box and also the screws inside the box to be used for T8-AML-V3s fitting Hard Disk Drive ( HDD ).

    Step 2 – If you are already using device than PLEASE MAKE SURE YOU REMOVE ALL USB STORAGE DEVICES BEFORE TRYING TO SETUP/INSTALL HDD.

    Step 3 – You need to format the HDD to NTFS using a computer to be detected by device when connected and create Partition using PC . ( Only if HDD is not purchased from us )

    Step 4 – Now look at device back panel and you need to open its back panel using screwdriver. Once it will be opened the back panel will come out and you will see a wires with jack which needs to be put in HDD ( Hard disk drive ) .

    Step 5 – Now put the HDD on back panel which you have removed in step 4 and set the HDD on back panel and fit it with the screw which was given inside the box as in step 1 .

    Step 6 – Once the HDD is fit on panel than connect the Wire jack into your HDD connection slot and fit it into device than close the panel by fitting it back to device with screw.

    Please look at the below 5.1 Android T8-AML-V3s video guide  –

    [embed]https://www.youtube.com/watch?v=IDfmCGsSm_Q[/embed]

     

    If you have any questions regarding the T8-AMl-V3-S you can follow us on Twitter.

     

     

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

Latest article


Ebox M8s Pro Plus Review this 2017 TV box has it all!

  August 22, 2017     EntertainmentBox     tv box

EBMC based on FTMC Kodi Jarvis for Android 4.4 users experience Kodi 17.3 Krypton

  August 18, 2017     EntertainmentBox     kodi

EBox H96 Pro Plus review Android 7.1.2, 3GB RAM 32GB ROM Amlogic S912

  July 30, 2017     EntertainmentBox    

Deepoon M2 Pro VR Headset Review, 3G RAM, 32G ROM, 75Hz, Exynos 7420

  July 15, 2017     EntertainmentBox     how to