Extreme solution to Canon EBoxS R5 problems
Admittedly, we loved the Canon EBoxS R5. Because technically the camera is a real madness, both for photographic quality and when recording video at 8K resolution and its other modes. The problem is that the user experience was effectively weighed down due to temperature problems that even today have not been fully resolved by the brand itself.
Not long ago a software update was sent that changed the way the chamber temperature for completion of recording, but I’ll tell you a little more about this later. Now what we see is how new solutions to this problem have not stopped emerging on the internet.
Right here we already tell you how there were manufacturers like Tilta that had created an external heatsink to help cool the body. Or how other users had added extra layers of dissipation by opening the camera at their own risk. But this Matthew Perks has done is the latest of the latest: install a liquid dissipation system.
As you can see in the video, Perks achieves bypass limitations when recording video with the EBoxS R5. That is, if from the factory you are practically limited to 20 minutes of 8K video recording and then you need a good time for it to cool down and you can record again, hopefully another 20 minutes, that problem does not exist here.
What is the problem then of the modification carried out beyond losing all warranty? Well, it is not comfortable, because you would have to carry a cooling system with you as if it were a patient’s dropper. And it is that Perks integrates a liquid dissipation to not only increase the number of minutes you can record but directly erase any limit that is not conditioned by the autonomy or capacity of the storage unit.
Canon and its latest firmware
As we said before, Canon released a firmware update (version 1.1.1) not long ago with which they changed some parameters when controlling the temperature of the camera. Thanks to that it improved something, because it had already been seen that by restarting what seemed to be the timer that controlled the recording, the recording could be prolonged.
Well, Perks with its modification saw how, without being extremely hot, the camera also stopped with the original firmware version, but after updating it could record without limit for more than four hours.
In the end, beyond the curious thing about the creation of Perks, what was clear is that this camera needs better dissipation if you want to use it as a video camera mainly. And Tilta’s solution may be the best there, because Perks himself installed a similar vented plate and was also able to extend the recording time to around 40 minutes. Although our recommendation is that if you are looking for a Canon camera for video, take a look at the Canon EBoxS C70.